Automatic Bagging Machine & Palletizing Systems Manufacturer

Машина для групповой упаковки во вторичных пакеты плотная укладка

Статьи

Машина для групповой упаковки во вторичных пакеты плотная укладка

Вторичная Упаковочная Машина

Is Your Salt Arriving as “Bricks” or Broken Bags?

In the salt mining industry, humidity is the enemy. Manual packing leaves air inside small bags, creating “balloons” that slide off pallets and turn into hard rocks during transport.

Our Salt-Specific Secondary Packaging Line solves the “aeration problem” by mechanically squeezing air out and tightly packing 1kg bags into 25kg/50kg woven sacks—engineered with 316L stainless steel to survive the harshest corrosive environments.

The “Balloon Effect”: Why Loose Packing Kills Profit

If you are managing a salt processing plant (like Tyretsky or similar operations), you know the nightmare of “aerated bags.” When 1kg salt bags are packed manually or by standard machines, they retain about 30% air.

This creates a chain reaction of logistics failures:

  • Pallet Instability: Rounded, air-filled bags do not stack flat. They act like rollers. When your forklift driver turns a corner, the entire pallet of 50kg master bags can collapse (the “flowering” effect).
  • Hygroscopic Caking: Excess air inside the master bag means excess moisture. Your premium table salt turns into a solid block before it even reaches the retailer.
  • Volume Waste: You are paying freight costs to ship air. A truck that should carry 20 tons often maxes out at 16 tons because the pallets are too bulky and unstable to double-stack.

To solve this, you need a specialized Машина для групповой упаковки во вторичных пакеты плотная укладка (Machine for group packaging in secondary bags with tight packing) that physically forces air out before the bag is sealed.

Вторичная Упаковочная Машина

The Double-Deck Shaping Conveyor presses “balloon” bags into flat “bricks” for high-density packing.

Engineering the Perfect “Salt Brick”

Standard packaging lines fail in the salt industry because they treat salt like plastic parts. Our BPM solution treats salt like a fluid that needs to be tamed. Here is the logic behind our tight packing technology:

  1. Vibration & Settling: Before the small bags enter the grouping unit, they pass over a specialized vibration conveyor. This settles the granules, reducing volume naturally.
  2. Mechanical Compression (The Shaper): As seen in the image above, our double-deck conveyor applies adjustable pressure to the top of the passing bags. This forces air out through the micro-perforations in the film, transforming a round bag into a flat, stackable rectangular “brick.”
  3. Precision Grouping: The machine counts and arranges these flat bags (e.g., 20 bags of 1kg) into a tight matrix. Because they are flat, they fit snugly into the PP woven master bag with zero wasted space.

The result? A rock-solid 25kg or 50kg master bag that stacks like a concrete block, not a beanbag.

Вторичная Упаковочная Машина

The final result: Tightly grouped small bags inside the secondary packaging, ready for stable palletizing.

316L Stainless Steel: Built for the Salt Mine

In a salt packaging facility, corrosion is inevitable for standard machinery. The “salt fog” in the air attacks carbon steel and even lower-grade 304 stainless steel, leading to rust contamination in your product and frequent machine downtime.

Our Машина для групповой упаковки во вторичных пакеты плотная укладка is configured specifically for this environment:

  • Contact Parts: All parts touching the salt are upgraded to 316L Medical Grade Stainless Steel, which offers superior resistance to chloride corrosion.
  • Electrical Protection: Control cabinets are sealed with positive pressure to prevent salt dust ingress, protecting the sensitive Siemens PLC and Inovance servos.
  • Dust Extraction: Integrated negative pressure ports at the filling station suck away the fine salt dust before it settles on the sealing bars, ensuring a hermetic seal every time.

Maximize Your Truck Loads

The ultimate test of a secondary packaging machine is how the product survives the journey from Irkutsk to Moscow. Loose bags mean you can’t double-stack pallets in the truck without crushing the bottom layer.

By utilizing our tight packing system, you achieve high-density pallets. The interlocking pattern of the master bags provides structural integrity, allowing for safe double-stacking in trucks and containers. This increases your shipping capacity by up to 20% per vehicle.

Вторичная Упаковочная Машина

Stable, tightly packed pallets allow for optimized truck loading and prevent transit damage.

FAQ: Salt Industry Packaging Solutions

Q1: Can this machine handle both 25kg and 50kg woven bags for salt?

Yes, the system is adjustable. You can switch between 25kg (e.g., 25 x 1kg) and 50kg (e.g., 50 x 1kg) formats via the Siemens touchscreen. Mechanical adjustments for bag width take approximately 20-30 minutes.

Q2: How do you prevent the woven bag from slipping during the sewing process?

We use a specialized “Bag Holding Mechanism” with high-friction grippers that support the heavy bag’s weight while it moves through the sewing head. This prevents the bag from tearing or slipping, ensuring a straight, strong seal.

Q3: Is the machine compatible with PP woven bags that have a PE liner?

Absolutely. This is the standard for salt packaging to prevent moisture. Our bag opening system uses strong vacuum suction and mechanical grippers to ensure both the outer woven layer and the inner PE liner are opened simultaneously for filling.

Q4: What happens if a 1kg salt bag breaks inside the machine?

The system features a “Salt Filtering Conveyor” with diamond-pattern rollers. If a bag breaks, the loose salt falls through the rollers into a collection tray below, preventing it from contaminating the final master bag or jamming the belt.

Q5: Do you provide installation services in Russia?

Yes, we offer complete turnkey installation. Our engineers can travel to your site for setup, commissioning, and training your local operators (Оператор) on how to maintain the equipment.

Need a consultation on packaging equipment?

CONTACT US →

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *