Construction Industry
Building Materials Packaging Solution
Heavy-duty open-mouth bag filling and valve bag systems for Portland cement, dry mortar, gypsum, wall putty, tile adhesive and similar construction powders — high throughput with total dust containment.
REQUEST A PROPOSALCement and Dry Mortar: The Toughest Duty in Bag Filling
Construction powder packaging presents a combination of challenges found nowhere else: extremely high abrasiveness that accelerates wear on all moving parts, fine particle sizes (10-50 microns) that penetrate every equipment gap, alkaline chemistry that attacks standard steel, and mandatory 25-50 kg bag weights that demand high-torque mechanical filling systems operating 18-24 hours per day.
BPM building materials lines use hardened-steel or ceramic-lined auger/impeller fillers, deep-draft valve bag spouts or wide open-mouth filling heads, and industrial chain-stitch or hot-melt closing systems rated for continuous multi-shift operation. Output: 800-1,200 bags per hour on a single station. Dust extraction integrated with plant central vacuum.
Construction Powder Engineering
Valve Bag Spout
Aerated impeller fills 25 kg or 50 kg valve bags in under 4 seconds. Spout retracts automatically after fill, sealing bag against dust escape during removal.
Open-Mouth Heavy Bagger
Wide-throat open-mouth filler with air pre-inflation and dual-speed fill (fast + trim) for 25-50 kg bags. Auto bag placer eliminates the highest-injury manual operation.
Industrial Dust Containment
Filling station enclosed in negative-pressure hood connected to plant-level baghouse filter. Dust level at operator station: below 3 mg/m3, compliant with occupational limits.
Technical Parameters
| Parameter | Specification |
|---|---|
| Bag Weight Range | 10 kg – 50 kg (open-mouth); 25 kg – 50 kg (valve bag) |
| Line Speed | 600 – 1,200 bags/hr |
| Filling Accuracy | ±0.3% – ±0.5% |
| Wear Protection | Hardened steel or ceramic lining on all powder-contact surfaces |
| Bag Formats | PP or paper open-mouth; PP or paper valve bag |
| Bag Closing | Industrial chain stitch sewing / hot-melt adhesive |
Design Your Cement or Mortar Line
Share your powder type, required throughput, and bag format. BPM responds with a wear-rated, dust-contained line proposal within 48 hours.