Filling Technology
Form-Fill-Seal from Tubular Film
FFS bagging machines that form heavy-duty polyethylene bags directly from a flat tubular FFS film reel — stronger, cheaper, and more sustainable than pre-made bags for 5 kg to 50 kg applications.
REQUEST A PROPOSALWhy Form-Fill-Seal from Tubular Film?
Tubular FFS film (Form-Fill-Seal) eliminates the pre-made bag entirely: the machine cuts a length of flat tubular polyethylene, heat-seals one end to create the bag bottom, fills the bag through the open top, then heat-seals the top closed. The result is a four-side-seamed bag with no bottom gusset seam that can fail — making it mechanically stronger than most pre-made alternatives at the same film thickness.
The economic case is compelling: flat tubular reel is 20-40% cheaper per kilogram than pre-made bags of equivalent barrier performance. The sustainability case is equally strong: thinner walls with equal strength means less plastic per bag. BPM tubular FFS lines run at 200-600 bags per hour depending on format and product.
Tubular FFS System Features
Bottom Seal Formation
Servo-driven hot jaw seals the tube bottom before each fill cycle. Consistent seal pressure and dwell time ensure no cold spots or burnt seals regardless of film thickness variation.
Top Seal + Cut
After filling and settling, servo jaw seals and cuts the top. One operation: seal, cut, discharge. No secondary station required.
Film Reel Management
Driven unroller with tension control handles 400-1,200 mm wide tubular reel. Splicing table allows continuous running without line stop for reel change.
Technical Parameters
| Parameter | Specification |
|---|---|
| Bag Weight Range | 5 kg – 50 kg |
| Speed | 200 – 600 bags/hr |
| Film Width | 400 – 1,200 mm tubular (to specification) |
| Film Thickness | 80 – 250 micron PE (standard); heavier for mineral applications |
| Seal Technology | Impulse or constant-temperature servo hot jaw |
| Applications | Fertiliser, feed, salt, sugar, cement, sand |
Explore Tubular FFS for Your Product
Share bag weight, product type, and annual volume. BPM calculates film savings versus pre-made bags and responds with a cost-comparison proposal within 48 hours.