Automatic Bagging Machine & Palletizing Systems Manufacturer

PACK FORMAT GUIDE · ZPACKER

How to Buy Sugar Stick Packaging Equipment: Match the Pack Format Before You Choose a Machine

A food producer searching for sugar stick packaging equipment should first separate narrow stick sachets from 1–5 kg premade paper bags. Zpacker is an automatic powder packaging line for M-fold square-bottom paper or paper-plastic bags, with screw dosing, dust removal and downstream inspection—not a roll-film stick-pack machine.

zpacker automatic paper bag packing machine with touchscreen for powder packaging equipment and kraft bag feeding

Start with the customer’s actual sugar pack format

For a mill, food factory or bakery supplier, the first buying question is not simply “which packaging machine is fastest?” It is whether the line receives a roll of film, a narrow premade stick tube, a valve sack, or a finished kraft bag. A true sugar stick format normally requires a dedicated stick-pack or vertical form-fill-seal system. Verify any sugar stick packaging equipment against the actual sachet format before purchase. Zpacker addresses a different requirement: automatic filling and closing of premade M-fold, square-bottom bags in common 1 kg, 2 kg and 2.5–5 kg ranges.

This distinction prevents a costly mismatch. If the project needs retail sugar sticks, request a stick-pack test and a film specification from the equipment supplier. If the project needs larger paper bags supplied already formed, Zpacker can automate bag feeding, opening, powder dosing, settling, dust control and adhesive closing in one continuous line.

Powder screw dosing and filling station on zpacker for flour packaging line with conical hopper and open kraft paper bag
Close view of zpacker automatic paper bag feeding and opening station with kraft bags, bag clamps, stainless frame, and touchscreen
Why manual or semi-automatic filling becomes a bottleneck

Manual bag placement, opening, filling and closing creates multiple handoffs. With powder, the open bag can release dust, settle unevenly and carry product into the sealing area. A basic filler also does not automatically restore the M-fold after the bag becomes three-dimensional, so trimming, rolling and closing remain operator-dependent.

How Zpacker fits premade paper-bag powder packaging

The line uses belt-fed bag handling and two coordinated bagging stations. A bag magazine supplies the premade bag; clamps open and position it below the dosing outlet. A screw dosing unit meters powder into the bag, while vibration and dust-removal stages help release air, settle the product and reduce powder escape. The process then folds the M edges, trims and rolls the top, applies hot-melt glue by dot or line spray, and presses the closure.

The equipment can be connected to a screw elevator or feeder, conveyor, checkweigher, metal detector, date printer, bag arranger and secondary packing. Safety logic prevents opening, filling and sealing when a bag is missing, and alarms can be configured for air pressure, guarding, drive and glue-temperature faults. These functions target the real production problem: fewer manual transfers while keeping the bag, powder and sealing steps in the correct sequence.

Side detail of zpacker paper bag packaging machine with bag magazine, opening area, vertical mechanism, air lines, and standing paper bags
Clean full-line view of zpacker paper bag packaging system with dosing unit, outfeed conveyor, and downstream equipment

Selection insight: For sugar, flour or another powder, confirm flowability, dust behavior, bag direction, paper-layer construction and glue compatibility before ordering. A paper-plastic bag must be checked for layer adhesion and top-seal performance. Zpacker’s final speed and configuration should be confirmed through the customer’s material, bag samples and acceptance test; it should not be presented as a stick-pack solution without that validation.

Reference specifications to confirm before you buy

The following figures are engineering references for a Zpacker project, not a substitute for a final quotation. They show which inputs a buyer should prepare: target weight, bag geometry, material behavior, utility supply and the required downstream line.

For a complete automatic packaging line, combine the main machine with the right feeding, inspection and secondary packing modules. The factory-floor view below also illustrates why the installation space, operator access and product transfer route must be checked early. When comparing sugar stick packaging equipment with a paper-bag line, the floor footprint differs greatly.

ItemZpacker referenceBuying confirmation
Product and bagPowder in premade M-fold square-bottom paper or paper-plastic bagsSend product sample, bag sample and bag direction
Pack weightsAbout 1–2 kg; another format about 2.5–5 kgConfirm the required retail range and changeover plan
Reference speedAbout 30–35 bags/min for 1–2 kg; 15–20 bags/min for 2.5–5 kgValidate with material, feeder and acceptance conditions
Dosing accuracyAbout ±0.5% (5‰)Define the test method and permitted tolerance
Bag dimensionsW about 80–140 mm; L about 240–320 mm; M-side about 60–80 mmConfirm final dimensions from approved samples
Utilities15.5 kW; 380 V ±10%, 50 Hz; air consumption about 0.76 m³/minConfirm final air pressure and site connection
After-pack inspectionCheckweigher, metal detector, date printer and grouping optionsSpecify compliance, rejection and secondary-pack needs
Large workshop view of zpacker packaging machine with operator, control screen, automatic packing line, and material handling area

Need the right sugar packaging format and line scope?

Send the target pack weight, product properties, bag drawings or samples, desired output and available utilities. BPM can confirm whether the project calls for a dedicated stick-pack machine or a Zpacker premade paper-bag packaging line, then define the dosing, dust-removal, inspection and secondary-packing configuration. Share drawings early so the sugar stick packaging equipment scope matches your format.

Wide bright workshop view of zpacker full packaging line with upper feeding system, conveyor, and bag handling area
Discuss your packaging format