Starch Powder Packaging: Zpacker Automatic Paper Bag Packing Machine for Dust-Controlled Lines
For starch and other compatible powders, the right equipment for automatic filling is not just a filler. Zpacker combines premade paper bag handling, screw dosing, dust removal and downstream inspection in one automatic packaging line for controlled 1–5 kg production.

Why starch powder packaging needs more than a basic filler
A starch producer, food plant or bakery ingredient supplier may start with manual filling or a semi-automatic machine. That approach can work at low output, but it leaves operators repeating bag picking, opening, filling and closing. The result is uneven rhythm, more handling around the bag mouth and a difficult transition to an automatic packaging line.
Powder behavior adds another constraint. During filling, starch can escape at the bag opening, remain around the sealing area or settle unevenly inside the package. A vertical packaging machine for roll film is also not a direct substitute when the customer already uses a premade kraft bag or a side-gusset bag. The bag format and the closing process are different.

For starch powder packaging, confirm the powder flow, target weight, premade bag dimensions and bag-mouth construction before comparing machine speeds. The equipment must control the product at the filling point and still leave a clean, stable edge for sealing.
How Zpacker matches the premade bag process
Zpacker is a fully automatic dual-station linear paper bag packing machine for powder products. It takes a prepared paper or paper-plastic bag from the bag magazine, opens it into its three-dimensional shape, positions it for filling and meters the product through a screw dosing system. This is the important distinction from a roll-film line: the machine is built around the customer’s finished bag supply.
For M-fold square-bottom bags, the process continues after dosing. The bag can pass through settling and dust-removal stations, then the top is folded back, trimmed, rolled, hot-melt glue is applied as a dot or line, and the top is pressed into shape. The machine therefore addresses the complete route from bag feeding to sealing instead of leaving the most sensitive closing operations to an operator.
Engineering note. Paper-plastic bags require confirmation of the paper-to-film bond and adhesive compatibility. Bag orientation is also directional; final acceptance should use customer samples, not a nominal bag description alone.

Which Zpacker configuration fits a 1–5 kg starch project?
The reference configuration uses two working ranges: approximately 1–2 kg and 2.5–5 kg. Indicative rates are about 30–35 bags per minute for the smaller range and 15–20 bags per minute for the larger range. Some project notes record approximately 40–50 bags per minute at 1 kg and 16–20 bags per minute at 5 kg. Actual output depends on starch properties, feeding stability, bag samples and the final acceptance plan.
The reference bag envelope is about 80–140 mm wide, 240–320 mm long, with an M-fold side width around 60–80 mm. Product-contact and exposed relevant parts use 304 stainless steel; the main frame is described as painted carbon steel with local anodized aluminium parts. A 10.4-inch touchscreen and PLC control support recipe operation, while no-bag, air-pressure and adhesive-temperature alarms protect the sequence.
| Project point | Zpacker reference | What to confirm |
|---|---|---|
| Product | Starch and compatible powder | Flowability, dust level and feeding behavior |
| Retail weights | 1–2 kg or 2.5–5 kg | Target mix and changeover plan |
| Bag | Premade M-fold square-bottom paper bag | W, L, M-fold, orientation and adhesive surface |
| Line additions | Checkweigher, metal detector, printer and grouping | Required inspection and secondary packaging route |

Specify the starch bag before you specify the machine
Send the starch sample, target weights, bag drawings or samples, expected output and available utilities. BPM can then check the screw dosing, dust-removal sequence, premade bag handling and downstream inspection for an automatic paper bag packaging line.
Discuss your powder packaging line