Производитель автоматических фасовочных машин и паллетайзеров

Машина вторичной упаковки устранение воздуха из пакетов

Статьи

Машина вторичной упаковки устранение воздуха из пакетов

Secondary Packaging Machine
Stop Shipping Air: The “Balloon Bag” Crisis in Starch & Flour Packaging

If you are managing a starch or fine powder plant, you know the nightmare: 1kg bags coming off the VFFS line looking like inflated balloons. They contain 30% air, refuse to stack, and turn your pallets into “leaning towers” that get rejected by supermarkets. Manual pricking creates dust clouds and explosion risks (St1). It’s time to switch to a Secondary packaging machine engineered specifically for physical de-aeration and high-density logistics.

The Hidden Cost of “Aeration” in Powder Logistics

In the fine chemical and food ingredient sectors—specifically for corn starch, wheat flour, and additives—the product behaves like a fluid immediately after dosing. The “Aeration Problem” isn’t just cosmetic; it is a direct hit to your bottom line.

When a 1kg bag is full of air, it becomes a rounded cylinder rather than a flat brick. Manual packers struggle to grip these slippery, bloated bags. To make them fit into a master woven bag, operators often resort to aggressive squeezing, which leads to micro-perforations. This releases white dust—a severe hygiene issue and a potential combustible dust hazard. Furthermore, because the bags are not flat, your shipping density drops. You are paying for a full truck but only shipping 75% of the payload weight because your pallets are bulky with trapped air.

Double-Deck Shaping: Turning Balloons into Bricks

Standard conveyors are useless for aerated powders. Our system employs a specialized Double-Deck Incline Conveyor designed to mechanically force air out without rupturing the seal.

Acting like two large hands, the upper and lower belts gently compress the bag as it travels up the incline. This physical pressure settles the powder and expels excess air through the microscopic pores of the packaging material or designated micro-perforations. The result is a transformation from a “balloon” to a hard, flat “brick.” This step is non-negotiable for high-speed automated counting and stacking.

Secondary Packaging Machine

Double-deck shaping belts compress aerated bags into flat, stackable units.

By flattening the primary package, our Automatic secondary bagging machine ensures that when the bags are grouped, they form a solid, interlocking matrix. This is critical for preventing the “flowering” effect (where pallets blossom outward and collapse) during transport.

Zero-Impact Loading for Fragile Bags

Once flattened, the bags must be loaded into the master woven bag (secondary packaging). In the starch industry, dropping heavy bags from a height is a recipe for disaster—the impact can burst the seams, contaminating the entire batch.

Our system utilizes a Servo Flexible Bottom Support mechanism. When the small bags are counted and released into the master bag, a servo-driven platform rises to meet them, reducing the drop height to near zero. It then lowers gradually as the bag fills. This “Soft Landing” technology eliminates impact shock, keeping your factory floor clean and your product contained.

Secondary Packaging Machine

Automatic bag fetching and opening system prepares the master bag for gentle loading.

From Wobbly Pallets to Export-Ready Units

The final proof of efficiency is at the dock door. A manual pallet of aerated starch bags typically tops out at 750kg because it becomes unstable if stacked higher. With our air-removal and brick-forming technology, the Palletizing robot can stack solid, square master bags up to 1.2 tons on a standard industrial pallet.

This 50% increase in pallet density means you are using fewer pallets, less wrapping film, and significantly fewer trucks to transport the same amount of product. Your product arrives at the customer’s warehouse looking professional, stable, and ready for automated warehousing systems.

Secondary Packaging Machine

High-density, stable pallets optimized for container loading and long-distance transport.

FAQ: Secondary Packaging for Powders & Starch
Q: Can the machine handle the dust generated during the bagging of starch?
A: Yes. The system is equipped with enclosed dust extraction points at critical transfer areas (bag opening, filling, and sewing). We also use IP65-rated components to prevent dust ingress into electrical panels.

Q: My starch bags are very slippery. Will the counter count them accurately?
A: Absolutely. We utilize high-friction PVC “grass pattern” belts specifically for slippery, dusty bags. This ensures positive traction during the acceleration and separation phases, guaranteeing 100% counting accuracy.

Q: Does the squeezing process damage the inner bag?
A: No. The Double-Deck Shaping conveyor applies gradual, uniform pressure across the entire surface of the bag, not a sharp impact. This gently forces air out through the bag’s natural porosity or micro-perforations without stressing the seals.

Q: What types of master bags can be used?
A: The system is versatile and handles PP woven bags (with or without liner) and Kraft paper laminated bags, which are standard for the export of food ingredients.

Q: What is the typical ROI for upgrading to this automated line?
A: By eliminating 8-10 manual packing positions and increasing logistics density by up to 50%, most starch and powder manufacturers see a return on investment in 12 to 18 months.

Нужна консультация по упаковочному оборудованию?

СВЯЗАТЬСЯ С НАМИ →

Comments

Leave a Reply

Your email address will not be published. Required fields are marked *